Everything BiomedRx publishes on laboratory equipment calibration in one place: the full service overview, the related services we provide, and the locations we cover.
Below is every page BiomedRx maintains for laboratory equipment calibration — the complete overview, the related services, and the surrounding locations our technicians cover.
Calibration intervals are not arbitrary. They come from the manufacturer's specification, the device's history, and how hard the department runs it. An instrument that drifts twice in a row needs a shorter interval, not the same one repeated, and a technician who does not adjust the schedule is recording a problem rather than solving it.
Work is performed to manufacturer specification and the applicable regulatory standard, and the record says which one was applied.
Calibration is the measurement step, not the repair step. A device is compared against a reference standard with documented traceability, the deviation is recorded, and the instrument is adjusted until it reads true across its working range — then the as-found and as-left values are both written down, because the as-found figure is what tells you whether anything treated on that device since the last visit was affected.
Every calibration performed produces two numbers that matter: what the device read when we arrived, and what it read when we left. Skipping the first one makes the record useless in an audit, because it removes any way to establish whether the instrument had drifted out of tolerance during the interval it was in clinical use.
Every visit produces documentation an inspector can read without a translator: what was done, to what standard, by whom, and when it is next due.
Technicians are qualified for the equipment they touch, and the qualification is on file rather than asserted.
Findings are reported plainly, including the ones that mean a device should be taken out of service.
Every calibration performed produces two numbers that matter: what the device read when we arrived, and what it read when we left. Skipping the first one makes the record useless in an audit, because it removes any way to establish whether the instrument had drifted out of tolerance during the interval it was in clinical use.
Scheduling is agreed rather than imposed. Clinical operations set the window, and work that cannot fit inside it gets planned around a shutdown rather than forced into a working day.
A complete equipment history changes capital planning from an argument into an evidence question. Departments that can show failure rates and repair spend per device get replacement budget; departments that cannot, do not.
There is no charge for the conversation that establishes whether you need this service at all.
Current developments in laboratory equipment calibration, with sources for further reading.
